Whirlpool Washer Diagnostic Mode & Master Reset
Access the hidden technician diagnostic mode and reset the main control board on Whirlpool Cabrio, Duet, and top-load models.
Advertisement - Reset Detail Slot
🔄 Official Reset Sequence
1
Ensure the washer is plugged in and in Standby mode (all indicator lights off).
2
Turn the main cycle selector knob counter-clockwise at least 3 clicks to clear the memory.
3
Turn the knob clockwise 3 clicks, counter-clockwise 1 click, and clockwise 1 click within 6 seconds (Sequence: Right 3, Left 1, Right 1).
4
All green status lights will begin flashing simultaneously, confirming you have entered Diagnostic Mode.
5
Turn the knob until only the 'Rinse' light is illuminated, then press 'START' to run the automatic reset and error code clearing routine.
Safety Warning: Do not open the lid while the automatic test runs.
Advertisement - Reset Detail Bottom Slot